Special Highmast Panel for Kerala | Highmast Panel
Highmast Panel
Specifications
* With Energy Saver
| Maximum Load | 8000/10000 Watts |
|---|---|
| Voltage | 230 / 415V AC |
| Frequency | 50 HZ |
| Phase | Single phase / Three Phase |
| Operating Mode | Auto / Manual |
| Clock | 24 Hrs Quartz Controller |
| Settings | 3(ON/OFF) Settings in 24 Hrs |
| Overload Protection | Inbuild |
| Under Voltage Protection | Inbuild |
| Delay ON | 16 Sec (Approx.) |
| Control Fuse | Inbuild |
| User security | Pass word required |
| Contactor | TC/C&S or Other optional |
| Metal Box | 1 mm Thickness MS Box with Powder Coating |
General Specification:
- Separate Panel Plate for control panel unit and Energy meter.
- We are doing Two different type of Panel Plates (Metal plate or hylam sheet) this is depend on Customer requirement.
- Energy saving settings (for Example all lights are ON by 6PM and after 10PM one set of lights are going to OFF and morning 5AM back t all lights are ON and then Morning 6AM all lights are going OFF). If want change the time we can.
- Class bidding on front door for to see energy meter reading.
- Motor forward and reverse switch for high mast lights UP/DOWN.
- Residual Current Circuit Breaker (RCCB) is a differential current sensing device used to protect a low voltage circuit in case of a leakage fault.
- Isolator Switch (IS) used to ensure that an electrical circuit is completely de-energized for service.
- We have Single Phase and also Three Phase.
- Box type (Key type lock).
- Pole Type Terminal Block
- Power Wiring 10mm2
- Control Wiring 0.75mm2
- 1 Year Warranty (Except Contactor).
- Made in India.